My porch light sometimes gets left on and annoys my very nice neighbor. It’s on a schedule but sometimes someone turns it on after the scheduled off time and forgets to turn it off. Is there a way to give her access to that switch only? I am using Kasa wifi switches and Alexa in the rest of the house. Thanks.
You must log in or register to comment.
Tell it every half hour to turn off… except the times it is supposed to be on.
Give you neighbor a scene switch connected to your Alexa that can control your light.
Simplest solution (which I have also used in the past) is to schedule a turn off event at say 4am and 6am.
If it’s already off, then there will no difference.
Don’t over engineer the solution, unless you really have to :)
Have an Alexa routinue that runs at midnight or 10pm or whatever and just turns everything off just in case. I have a few of those routinues set up to turn off my kids room lights, turn off their music, etc. etc. I have a bathroom light routinue that runs every hour all night to turn the lights off in case they get up in the night, use the bathroom and leave the light on.
There are lots of good points here about preventing the annoyance to start with: better fixture/bulb/aiming, timer. Are you willing to cede control at a time when you may be expecting someone or put it on briefly so you can see?
I recommendcthese other approaches first. Why make your neighbor do something to remedy the problem?
Either add another schedule to sweep it off later at night or add a motion sensor for after hours.
The neighbor could log in under your kasa account but would then have control over all devices in there. I wouldn’t have a problem with this. I share my account with my father. We randomly turn each others lights on and off. It’s fun
When we first got smart switches, I put one where my daughter Abby studies. I named it “piss abby” and when she was studying, I said “piss abby off” to shut the lights. She gave me a look and said “piss abby on” and kept studying.
Kasa switches can be set to turn off automatically X minutes after being turned on.
You should make a secondary turn off time or max on time, I wouldn’t give access.
Lots of other solutions provided, but to answer your question, yes, you can give them your kasa (or tapo) account log in information which would let them control all of your kasa/tapo stuff (including cameras if you have them).
You could create a separate kasa account, then reset your porch light kasa switch and join it to the new account. Then just share that account with your neighbour, she’ll be able to control it from her home wifi via remote access. You won’t be able to integrate the porch light with alexa or any other kasa devices on your main account once it’s separate.
Sure, but that’s the OP’s problem, not mine :)… Already lots of alternate suggestions to his problem, I didn’t need to pile on. When I checked the only answers close to what he ask was “no” which is wrong. A separate kasa account for this solves the problem. And it’s easy to reset the kasa to gain it back if the relationship sours since he has physical control of it.
I highly recommend not giving your neighbor, however nice they may be now, control or the illusion of control in this situation. Situations change, either relationship-wise or otherwise. It’s best to resolve the actual issue, and not make a problem worse by fixing the annoyance to your neighbor, and/or fixing your automation to better suit both of your needs.
Attach a shade on the side of the light which directly effects your neighbor. Large plant/statue/tree to reduce/eliminate problem. You can also add another schedule as others suggested to turn off after it’s been on for a specified amount of minutes. Still I would rather see if I can block the light to my neighbor so that I can use my smart light whenever and however I want :)
Giving access for your smart switch to your neighbor is no-no for me.
Unfortunately the light is mounted high up near the roof. It isn’t so much the light itself as the brightness reflecting off my white siding.
Use webhooks. In Alexa, add a webhook as a trigger and a routine to turn off the lamp, and your neighbor just needs to go to this specific url and turn off the light. Simple and fast.
https://trigger.esp8266-server.de/
https://www.amazon.com/Michael-Dworkin-Webhook-Routine-Trigger/dp/B09RGPYHLL
I’m sorry, I couldn’t resist posting this here
lol I thought that link was going to be
Lol. Exactly what I’m trying to avoid.
I think you missed the point. You are overcomplicating something with a much easier solution.
You already have a “smart” switch. Make your programming smarter to avoid the problem instead of a using a complicated workaround.
Not to mention that telling your neighbor “you turn it off” is not exactly the courtesy that OP might think it is.
Microphone on porch that triggers on hey asehole, get another light!
Why is your light shining into his house anyway
If Reddit still had coins I would absolutely give you some kind of award.
Simple automation is your friend.
Trigger, light turns on for x minutes
Condition, between the hours of x & y
Action, turn the damn light off.
