In 1862, Georgia dentist, builder, and mechanic John Gilleland raised money from a coterie of Confederate citizens in Athens, Georgia to build the chain-shot gun for a cost of $350. Cast in one piece, the gun featured side-by-side bores, each a little over 3 inches in diameter and splayed slightly outward so the shots would diverge and stretch the chain taut. The two barrels have a divergence of 3 degrees, and the cannon was designed to shoot simultaneously two cannonballs connected with a chain to “mow down the enemy somewhat as a scythe cuts wheat”. During tests, the Gilleland cannon effectively mowed down trees, tore up a cornfield, knocked down a chimney, and killed a cow. These experiments took place along Newton Bridge Road northwest of downtown Athens. None of the previously mentioned items were anywhere near the gun’s intended target.
r*ddit

  • Technus@lemmy.zip
    link
    fedilink
    English
    arrow-up
    180
    arrow-down
    2
    ·
    3 months ago

    The only reason we know the right answers are because people like this weren’t afraid to try new things and find out what doesn’t work.

    If you’re gonna dunk on the man, do it because he was a Confederate.

    • lennivelkant@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      19
      ·
      3 months ago

      I find myself repeating some version this sentiment every now end then: There are good reasons to hate (whoever the conversation is about), but this ain’t one. We don’t need to grasp at straws when there are solid branches.

    • andrew_bidlaw@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      14
      ·
      3 months ago

      Or that he failed at convincing them to get funded more. I feel like a fleet of Virginia-like ironclads with twin-guns could’ve sank their pockets for good.

  • deegeese@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    98
    ·
    3 months ago

    I’m guessing the main problem is the two barrels never detonate at the same instant, so the chain flings the shot wildly somewhere in the forward field of fire.

    Regular chain shot packs the projectile in a single barrel.

    • Dr. Bob@lemmy.ca
      link
      fedilink
      English
      arrow-up
      47
      ·
      3 months ago

      If I recall I don’t think barrels and balls were precision machined so there would always be “windage” or some sort of gap between the ball and barrel. So not only the timings as you identify, but also differences in force between the balls due to windage and charge.

    • Tankton@lemm.ee
      link
      fedilink
      English
      arrow-up
      5
      ·
      3 months ago

      Isnt this a super easy fix? Just make one detonation chamber connected to 2 barrels. Or make a longer barrel holding 2 balls with the chain between them.

      • SSTF@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        3 months ago

        The even easier fix is one barrel firing chain or bar shot. The method that had been done for at least 100 years at that point.

        The only real reason for two barrels is to try and get a longer chain to be more effective against infantry formations, but at that point just load grape or canister shot and it works better and the cannon crew has an easier time of reloading.

      • Aqarius@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        3 months ago

        In theory, yes. But in practice, option 2 is how it usually is done, and option 1 would still require scrapping the gun and casting a new one, assuming it would work and not throw the shot off based on the weight difference of the balls.

      • warbond@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        3 months ago

        I think one chamber with two barrels would propel the projectiles unevenly, wouldn’t it?

  • NineMileTower@lemmy.world
    link
    fedilink
    English
    arrow-up
    31
    arrow-down
    7
    ·
    3 months ago

    During tests, the Gilleland cannon effectively mowed down trees, tore up a cornfield, knocked down a chimney, and killed a cow

    So, it worked?

    • YarHarSuperstar@lemmy.world
      link
      fedilink
      English
      arrow-up
      67
      arrow-down
      12
      ·
      3 months ago

      None of the previously mentioned items were anywhere near the gun’s intended target.

      Reading is hard.

      • colonelp4nic@lemmy.world
        link
        fedilink
        English
        arrow-up
        35
        arrow-down
        10
        ·
        3 months ago

        Kindness is also hard (and takes practice). I believe in both of our abilities to keep improving!

      • ahornsirup@feddit.org
        link
        fedilink
        English
        arrow-up
        18
        arrow-down
        1
        ·
        3 months ago

        Which isn’t necessarily an issue if your goal is to hit somewhere in a line of charging infantry. Why you wouldn’t just use canister shot is beyond me, but accuracy isn’t much of an issue if your target is an entire enemy formation.

        • YarHarSuperstar@lemmy.world
          link
          fedilink
          English
          arrow-up
          7
          ·
          3 months ago

          It’s an issue if you need the chain to be stretched across parallel to the side by side group of soldiers charging at you.

        • merc@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          5
          ·
          3 months ago

          I don’t think you realize how much they missed by:

          “On its second firing, the chain shot across the horizon and into a thicket of pine.”

          So, you’d miss the entire army you were shooting at, and hit a nearby forest.

    • Xatolos@reddthat.com
      link
      fedilink
      English
      arrow-up
      20
      arrow-down
      1
      ·
      3 months ago

      Gilleland’s invention was a failure. When it was first tested on 22 April 1862, it was aimed at a target of two upright poles. Uneven combustion of the powder and casting imperfections in the barrels gave the connected balls a spinning movement in an off-center direction, with witnesses reporting that on its first firing it “plowed up about an acre of ground, tore up a cornfield, mowed down saplings, and then the chain broke, the two balls going in different directions”.

      On its second firing, the chain shot across the horizon and into a thicket of pine. “[The] thicket of young pines at which it was aimed looked as if a narrow cyclone or a giant mowing machine had passed through,” reported another witness.

      On its third firing, the chain snapped immediately and one ball tore into a nearby cabin, knocking down its chimney; the other spun off erratically and struck a nearby cow, killing it instantly. Gilleland considered the test-firings a success.

      The inventor seemed to think so.

      The wikipedia article about it.

  • masterofn001@lemmy.ca
    link
    fedilink
    English
    arrow-up
    11
    arrow-down
    1
    ·
    3 months ago

    3° divergence…

    So, you could basically stand in front of it a few feet away and never get hit.

  • jubilationtcornpone@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    6
    ·
    3 months ago

    Side by side shotguns kind of do the same thing where they kick slightly to one side or the other. That’s why over/under is the more common double barrel configuration anymore.

    The movement is a lot easier to compensate for with a shotgun since it’s easier to control and fires shot shells instead of cannonballs.

  • BruceTwarzen@lemm.ee
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    2
    ·
    3 months ago

    People who never invented or succeeded in anything: haha look at that idiot.