Hey lemmings!

I wanted to share a quick update about our recent performance issues and how I have addressed them.

The last 24h have been a bit rough for lemm.ee.

Last night, I spent some time debugging federation issues with lemmy.world. We managed to significantly improve the situation - lemmy.world content is now reaching lemm.ee with a very high success rate - but this has had the effect of increasing incoming federation traffic on our servers significantly.

Additionally, we have been seeing steadily increasing normal user traffic over the past week, which is awesome from a community standpoint, but of course means that our servers have to do more work to keep up with all the new people.

To top things off, today there appeared a badly configured instance in the network, which was effectively launching a DoS attack against lemm.ee for several hours. Most likely it was unintentional, but unfortunately the end result was a sudden increase in our server load.

All these factors combined resulted in a really bad experience for most lemm.ee users today. Page load times have consistently been spiking into as much as 10 seconds or more for the whole day:

In fact, a lot of page loads just timed out with errors.

Fortunately, it seems I have managed to clear up the problems!

I have put a bunch of mitigations in place, and after monitoring the situation for the past hour, it seems that our performance issues have been resolved for now. So hopefully, you can enjoy browsing lemm.ee again without it feeling like torture!

Here are specific steps I took:

  • I have doubled the hardware resources for our backend servers and database.
  • I purchased a Cloudflare pro subscription for lemm.ee for 1 year. This took out a considerable chunk of my budget for lemm.ee, but in return it will allow me to analyze and optimize our cache usage to a far greater extent. I am already seeing vastly reduced load times for cacheable content (try opening https://lemm.ee a few times in a row as a logged out user - it should be blazing fast now!)
  • I have configured a rate limiter which will prevent future DoS from the specific method that was used against us today.

Of course, all of the above is costly. Luckily, lemm.ee users have been very generous with donations in the month of June, and in fact a significant amount of donors have opted for monthly recurring contributions. This all gives me the confidence to increase our spending for now, and I am currently expecting to NOT increase my personal planned contribution of 150€/month, as the increased costs so far are entirely being covered by donations!

Let me take this opportunity to thank the sponsors who made the upgrades possible! All lemm.ee users are now enjoying better performance thanks to you, I could not have done it without you awesome people.

On a final note, I just want to say that I hope a lot of these issues can be solved by optimizations in Lemmy software itself in the future. I have been personally contributing several optimizations to the Lemmy codebase, and I know many others are focused on optimizations as well. Just throwing extra resources at the problem will probably not be a sustainable solution for very long 😅. But I am optimistic that we are moving in the right direction with the software changes, and we’ll be enjoying reduced resource needs before long.

That’s all I wanted to share today, I wish you all a great weekend!

  • varzaman@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I really appreciate how communicative you are about all the instance information. It’s what made me sign up just now!

  • RoundSparrow @ .ee@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I have configured a rate limiter which will prevent future DoS from the specific method that was used against us today.

    For those of us running other Lemmy instances, what should we be looking for?

  • AstralWeekends@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I hope years from now you get to look back on these times as the beginning of something great not only for you, but also for the future of social media on the internet. Your dedication to this project has been admirable, and you are absolutely crushing it.

  • alternate@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Cool! This is my first comment on Lemmy, and I’m excited to see what’s in store for the future here!

  • lol@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I jumped from another instance, this one loads so much faster and has more accurate numbers on communities from other instances. Really cool stuff.

    • rm_dash_r_star@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Yeah @sunaurus@lemm.ee is really optimizing the hell out of this instance. A driver for me right now is he’s running the release candidate for 0.18.1 and it’s a huge improvement for me over 0.18.0. He’s also a dev on the project so he’s getting fixes in as well.

    • EeeDawg101@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I just joined up too after having lots of issues on lemmy.world, which is not surprising with how many people are flooding over. Someone commented about lemm.ee and I’m also really liking it. The performance difference is huge! I also love how the owner/dev talks about the instance. Seems like this will be a good one to stick with and use as primary.

      I am curious about membership counts on communities though. On other instances I’ll see a community member count of around 1000 and on here, it shows the (same community) is nowhere near that high. Are you saying that the lower number is more accurate? Or maybe it’s a syncing issue and with all the signups happening the numbers just haven’t had a chance to get caught up?

      • thegiddystitcher@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        If you’re viewing a community through an instance that isn’t the one it’s actually hosted on, you’ll see a lower subscriber count because as far as I’m aware it’s showing the number of subscribers from the instance you’re viewing it on rather than the total.

        • xavier666@lemm.ee
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          as far as I’m aware it’s showing the number of subscribers from the instance you’re viewing it on rather than the total

          That explains all the weird numbers

        • johnofthesea@lemm.ee
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          showing the number of subscribers from the instance you’re viewing it on rather than the total

          I know this is not priority now, but it would be cool if it showed both.

      • lol@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        The instance its hosted on is probably the most accurate. The reason I said this one was more accurate is because the old one I used had many posts without any comments and some posts were missing completely while this was showing most if not all of them. It will probably never be 100% synced due how lemmy works I guess.

  • db0@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Can you tell me what you’ve cached? I’m not using cloudflare but I am using haproxy which has frontend caching builtin. It was next on my plan but if you share your caching setup I can try to replicate it on lemmy.dbzer0.com

    • sunaurus@lemm.eeOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Mostly all images are served through a cache. I would like to also cache some static HTML (such as pages for unauthenticated users), but it breaks due to some users requesting these pages with an Accept header for an activitystream content-type, and I haven’t had time to figure out a solution for accounting for the content type in my cache key unfortunately 😅. But if you can do that easily in your cache then for sure you could also cache any static pages for a minute or so.

      • db0@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Ye I can cache differently depending on headers. Surprised that caching images helps a lot since your pictrs is hosted in an independent box anyway

  • rm_dash_r_star@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Yeah the slowdown was a bit rough, been browsing off and on all day today. Thanks for fixing that. Seems to be working a lot better now. That’s a bummer you had to increase expenses though.

  • Kush@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    It’s feeling quite good at the moment so thank you for all your hard work.

  • intensely_human@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Thank you for operating this instance!

    I hope you are tracking some dollar amount for your time as well. Even if you’re not actually taking any pay it would be good to have a sense of labor as a component of a thing’s upkeep cost.

    • sunaurus@lemm.eeOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      1 year ago

      Thanks for the kind words! To be honest, I’m not tracking my time, as I’m not expecting to break even at all anyway, even before starting to account for the time I’ve spent 😄

  • WndyLady@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I’m so grateful for your knowledge and persistence. My donation finally went through after fighting with my bank. Maybe I don’t have to give up my Gen X card afterall.

  • tryagain@lemm.ee
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Alrighty, I had a browse around and I’ve settled on lemm.ee + Jerboa and it’s looking good. Thanks for all your hard work handling the influx of reddfugees like myself. This gives me hope ❤️