Hello everyone, I have a third gen 4runner and I was going to do some brake work on it but I am unsure about the bleeding process. I am going to replace the abs pump, the front rotors/calipers/pads, and the soft line connecting the front brakes to the hard line. If i wasn’t doing the abs pump, I would only bleed the front brakes, but since I am doing the pump, do I need to bleed the rear drums as well? Thanks in advance.
Yes, as others have stated, by replacing the abs pump, you will open up all the lines to air. Once you’ve replaced the necessary parts, you’ll need to bleed all 4 corners, generally starting with the right rear, left rear, right front, and then left front.