Hello everyone, I have a third gen 4runner and I was going to do some brake work on it but I am unsure about the bleeding process. I am going to replace the abs pump, the front rotors/calipers/pads, and the soft line connecting the front brakes to the hard line. If i wasn’t doing the abs pump, I would only bleed the front brakes, but since I am doing the pump, do I need to bleed the rear drums as well? Thanks in advance.
Not a helpful comment. More of a warning… Hopefully you have access to the same equipment a dealer has. Bleeding ABS systems are tricky as heck to the nature of the AB module. Have a shop manual handy and read it twice. Especially the part about special tools.Good luck.