https://www.amazon.com/dp/B001GS0ZBY
Here is one of the reviews from Amazon. I am just wondering if it is true or not because I have seen, in some cases, you have to recalculate the torque when using an extender.
I hit upon the idea of using this device as a means of connecting my torque wrench to an open ended wrench in order to apply the specified torque. As long as you position the torque wrench at right angles to the wrench you are using, you will not add additional spurious torque to the setting you want - the theory being that the lever arm of the torque wrench itself does not change. I verified this by sliding the torque wrench up and down the main wrench handle and achieved the same result everywhere - i.e. no additional torque on the sensor and the setting of the torque wrench remains accurate
When they’re at right angles, the torque there does not need recalculation. But the correct explanation is that the trigonometric terms will cancel out in the new torque equation:
the new “effective length” of your torque wrench beam will be longer in proportion to the secant of the angle of the new triangle defined by the two wrenches
the component of your applied force that contributes to the torque will be F cos(θ)
So the applied torque is the same as just using the original torque wrench directly.
Thank you!