hi. this morning i started the car and these came up at same time. what could be wrong ? someone told me probably something like a tire sensor is wrong probably out of hitting potholes. the car is a 2010 santafe v6 4wd
That was me. Replied to a comment once before. The wheel speed sensor has come loose on one of your wheels (or has stopped working).
It’s a cable that connects to the inside hub of each wheel. It monitors the wheel speed of that wheel and compares it to the other 3 so knows if it is skidding or not.
A car scanner will tell you which one is not working, otherwise you just have to get under and have a look for any that are broken or loose. (There’s a connection box too usually up in the wheel well somewhere).
Note: there might be a 2ND cable to your wheels. This one monitors the wear of your brakes and if you follow it, it connects to the disc pad.
The cable you want connects to the inside HUB.
well is it ok to drive the car ? i mean i personally dont trust the shops around my area and they usually dont do a good clean work but the shop i know and im friend with is around 50k away from me. something around 31miles i think. is it ok to drive the car if the sensor is wrong ?
Hello OP!
Did you drive the car after that without any issues? If so, they’re likely crap sensors, and it’s time to replace them, no rush except for the ABS and TCS sensors as those are the only ones that are cause for concern (as those are the bare minimum safety features)
yeah the car drives find. accelerate ok and breaks ok and i checked under the car and there is not a single leak from anywhere. so i guess it could be the wheel sensor or maybe another sensor
You got to pill Obd2 codes but an Abs sensor most likely, however car can still be driven normally until you get to it.Abs Sensor