I am going to build probably a few keyboards (like 3) for people to gift to. Since 100% PCB is not as popular as ergo boards, Im having a hard time finding any.
Do you have any 100% PCB (aliexpress or gerbers for printing in a PCB service like jlcpcb) that you prefer?
My goal is to make it as cheap as possible.
I built a 130% design. It cost about $75 delivered for five PCBs from JLCPCB. But I do it through-hole, so add:
-
Three resistors
-
Three LEDS
-
130 diodes
-
Encoder(all together, like $5 per board if you bought the diodes by the thousand)
-
MCU (I’ve been using the $6 nanoCH32V305, but your design may vary)
-
Caps and switches (not going there, way too personal taste)
You can also abuse their “aluminium PCB” service to generate a plate. It’s not as stiff as a real laser-cut/waterjet-cut plate, but the price is right (like $80 for five; they add a penalty fee for asking for 130 big holes punched into the plate :D :P Then use a second plate as backing for a “sandwich style” mount.
Another alternative is some of the cheap hotswap kits on Aliexpress-- there’s a 100% for about USD55 under the name “Monsgeek MG108W”; I can’t speak of it for experience. I tried another similar but pricier one (SK108) a while back when I wanted a testing experience, and it worked well enough but the software for customization was awful
-