Don’t speak
I know just what you’re sayin’…
So please stop explainin’
Lol Dutch lease drivers be like
They’ll fix it sometime
Not just that. I mean a 50k+ car that needs ducttape to hold the hood down! Wtf!? 🤣
I mean I like bashing on Tesla as much as the next guy, but any car can end up like this regardless of price. They probably bumped into something that broke the locking mechanism and this is probably just a temporary solution until they get it replaced.
A permanent solution until it gets replaced 😹
Its temporary, unless it works.
Breaking the locking mechanism while doing no damage to the plastic fender is an amazing feat.
Also, there’s usually a 2nd safety mechanism that prevents it from popping up.
how do you bump it into something enough to break the latch without messing up bumper, number plate and bonnet? all of it looks intact
It was just an example. There are a thousand other ways to break the latch without messing up the rest of the car
*Dutchtape
Yeah buddy of mine mended his lease car with duct tape. He rear-ended someone at a roundabout at 30 km/h. Couldn’t get it fixed quickly, had to wait 3 months for the garage.
Fuckin hell that was a long lunch. Was it in France?
That’s a 100k car. It’s an S
It’s a 50k car disguised as a 100k car
All cars break. That’s why they all come with warranties.
I am the warranty
warranties don’t cover accidental damage, that’s what the insurance is for.
Despite the insistence of a couple generations of shadetree mechanics and even its own manufacturers, the proper nomenclature for the material in question is “duck” tape, not “duct” tape. It was never intended for, and performs very poorly at the task of sealing ducts.
“Duck” is the name of a type of densely woven cotton cloth, treated with wax. The waterproof nature of this cloth is where the name comes from, as duck feathers famously repel water.
The original duck tape was made by applying a pressure sensitive adhesive to strips of duck cloth. Modern variants still use a fabric matrix for strength, but have added a layer of plastic to provide water resistance.
Either are okay, because the history is actually linen tape (“doek” tape, from Dutch) and it was branded as both when Anglicized.
Here is an alternative Piped link(s):
the history is actually linen tape
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.
TIL!
That said, reading the Wikipedia article, there very much were tapes made for repairing ducts.
It was commonly used in construction to wrap air ducts.[20] Following this application, the name “duct tape” came into use in the 1950s, along with tape products that were colored silvery gray like tin ductwork. Specialized heat- and cold-resistant tapes were developed for heating and air-conditioning ducts. By 1960 a St. Louis, Missouri, HVAC company, Albert Arno, Inc., trademarked the name “Ductape” for their “flame-resistant” duct tape, capable of holding together at 350–400 °F (177–204 °C).[21]
What’s the worst that could happen? The bonnet pops up and covers the entire windshield while you’re on the highway?
Yes. Could you imagine that happening at highway speed?
It’d be even weirder if it happened while parked
I’m hiking across Ontario. It will never stop baffling me seeing the most rural houses imaginable, middle of nowhere. What’s in the driveway? Tesla.
What you gonna do if it breaks down!? Walk!?
Edit: I’m learning a lot about cars in this thread :D Thanks for the feedback all!
I mean what do you do if your Jeep or Toyota breaks down!? Walk!?
Have you ever fixed an older combustion engine vehicle? You watch a youtube video and a few hours later, you can, in most cases, at least get the car to a state so you can drive it to a mechanic. On modern combustion engine vehicles this is still possible, although a bit more difficult.
Uhhh, EVs? No way you’re fixing anything in there.
On an EV, if anything happens to the motor or battery that they need work, you’ve done something so extraordinarily bad that you’ve somehow physically damaged them. Under normal use, they shouldn’t need maintenance due to the much much less strain put on the motor without the constant explosions and multitude of fluids running through it. It’s literally just a motor and a few electronics hooked up to a battery. There’s nothing that special about it, and it’s been proven to be a pretty reliable setup. Beyond that, they are a normal vehicle with normal replacement parts. Brakes, shocks, suspension bushings…all the same as every other vehicle out there.
You’re worried about literally nothing…
What sucks is those components are wrapped together with silicon valley (wannabe) software that’s so rushed and poorly planned (except the monetization!) that minor sensor failures take down the whole system. At least it looks pretty.
A few decades of standards and convergence I hope will result in some extremely reliable cars and lots of aftermarket parts.
I’ve been an Automotive Technician for a couple decades now and I can safely say combustion engines have way more parts that fail and if you can use a youtube video to diagnose your ICE (very rarely is this possible) then you’re smart enough to do the same with an EV.
There is way less parts on an EV and they are way easier to fix.
Most EV components you’d need to replace are the same as in an ICE. There’s way less that needs to be done on an EV. The expensive bit has an 8 year warranty on most EVs including Tesla.
Tesla cars can only be serviced by Tesla mechanics with Tesla parts, and they have software locks.
https://www.reuters.com/legal/tesla-hit-with-right-repair-antitrust-class-actions-2023-03-15/
Bigger parts sure, but I wouldn’t trust a village mechanic with an engine job either.
You can change brakes, suspension, lights, pretty much everything without software locks. Only drive train is locked, which rarely fails and it does so progressively.
You can change brakes, suspension, lights, pretty much everything without software locks. Only drive train is locked, which rarely fails and it does so progressively.
Also you can enter service mode now and tell it to reflash the whole car. Need a new steering rack or camera for example? Swap the part, hit reflash and the car flashes the correct vin, coding and software into the part and offers calibration afterwards.
Also built in scantool to read fault codes and do basic diag. More advanced diag needs Tesla Toolbox. Costs $165 for a day of access/$500 per month, but is possible with an ethernet cable and doesn’t need a $1800 SAE J2534 box.Cool, TIL!
-
In an ICE you can have an air/fuel/electrical issue, and the entire system is designed to overcome the inherent design flaws of the technology, thus making it convoluted and difficult to understand. Not only can an EM be explained and taught far easier than a full ICE breakdown, but you can literally build one as an Elementary school science project with some copper wire, batteries, and magnets. The technology has only one point of failure as opposed to three. If it doesn’t work, electricity is the ONLY possible reason.
-
EM’s have a significantly smaller chance of failure due to the simplicity of the design with fewer moving parts, so while current EM’s aren’t really built to be repaired by their operators, one that’s designed to be would be incredibly simple for the layman to understand and repair had they the knowledge and tools available. The technology itself isn’t the issue, in fact, I’d argue the average random could learn how to repair an EM in much less time than an ICE, we just don’t build them that way currently (like how we don’t build modern ICE’s to be repaired by their drivers.)
Ok. So do you think EV makers make it easy to repair them? Because they sure as hell don’t. On paper you can, I agree with that. But they lock the software and hardware in bizzare ways, so that you have to go to a certified mechanic.
Which is exactly what modern cars are like to fix, what’s your point? I specifically mentioned how we don’t design them to be repaired by the owner in my comment.
That all sounds very impressive, rocket m00se. Until you get down to the tricky business of actually trying to identify and replaced a single failed cell in a massive factory-sealed battery array. It is NOT easy and there are many traps placed in your way on purpose. I would rather work on a broken ICE vehicle any day of the week.
It’s almost like I specifically mentioned that modern vehicles (no matter the powerplant) aren’t designed to be fixed by the person driving it, and are created so that special tools/technicians are needed.
I stand by my point, EM’s are far simpler and if they were designed like old cars with the owner in mind, they’d be dead simple for someone with next to zero knowledge to troubleshoot compared to the over engineered mess that internal combustion ended up as.
-
Also, in many cases it’s easier to get electricity than gas in remote locations. Saves a lot of annoying refueling trips.
Most villages have a mechanic that’s used to working on the common brands/cars, if you decide to move to a rural location that’s what you buy.
Then again, most electric cars barely require any maintenance.
Yeah, there are so many moving parts on an ICE that an EV just doesn’t need at all.
The village mechanic will still be able to do brakes and suspension work which are the most common types of issues unless you drive a particularly unreliable car.
You bring it to any garage. Where do you bring your tesla? To craigs repair shop? They can hardly fix their own cars
There’s an entire engine missing that doesn’t need to be worked on.
Stuff like brakes and suspension, any generic place will be able to do.
Huh? Charge it before that happens? Exactly like you’d get gas before you run out of it, only that you can do that at home and don’t need a gas station
Sure, but what garage do you bring it to? My friend waited 8bor so month for a windscreen replacement.
Anyone can replace the windscreen. It’s not any different on an electric vehicle.
