This is an automated archive.
The original was posted on /r/3dprinting by /u/-Live_Free_Or_Die- on 2023-08-15 20:34:32+00:00.
Have a buddy who needs a custom part for his job and his company is footing the bill. Basically its a 6in diameter disc, 1/4 inch thick, needs to be as strong as possible so 100% infill. I’m going to use PLA+. Sliced it and it says its a 7 hour print time and 150g of fillament. How much should I charge?
You must log in or register to comment.